Jewelled Internally Labret

The Titan Highline® Internally Threaded Jewelled Labret Stud with a strength of 1.2 mm is available in lengths of 5.0 – 10.0 mm (in steps of one). The compatible ball has a diameter of 2.5 mm and is beset with a classy rhinestone in crystal clear (CC). In the length 9.0 mm it is also available with a light blue (LB) rhinestone. With 1.6 mm strength, the stud is available in lengths of 6.0 – 10.0 mm (in steps of one). The compatible 2.5 mm balls are available with rhinestones in four different colours: crystal clear (CC), light blue (LB), sapphire blue (SB) and pink (PK). The lower end of the attire is flattened, the upper end is completed by a threaded ball (so a labret / stud consists of a stem with a small plate and a ball). The ball gets screwed in the studs internal thread. That makes insertion as easy as possible! By the way, all threads in our jewellery collection are standardised, therefore you can combine the rings, balls, bars and attachments. Keep an eye on sizes and threads of your favoured balls and attachments!

The article can, like all basics, be sterilised in an autoclave and due to the skin friendliness of the material it is absolutely harmless to allergic persons. Attention: the stones are not socketed but glued. They can get lost depending on the way of use. If the piercing is used moderately we grant a guarantee of 24 months after receipt of the article. You should not wear an article with glued stones in swimming pools, baths, saunas or similar conditioned surroundings. Please do not lay them into cleansers or germicides, as this harms the material, and we are no longer able to grant a guarantee.

This article is also available in the Steel Basicline® (SIT).

The suitable jewelled replacement balls can be found in the Titan Highline®, they are called DOT and are fitting only on 1.6 mm thickness.

If there are any questions left, please do not hesitate to contact us, the employees of the Wildcat corporation will give you advice!